I'm having a bit of a equipment update and consolidation here and am selling two of my audio interfaces and possibly a third one. I will be listing these on eBay this week but thought I'd pop a few details here in case anyone is interested. Here's what's on offer...
1. M-Audio Delta 1010 LT - virtually brand new in box. ASKING $270AU
This includes the card, flyleads plus I will include a 3 meter multicore for the line level IO terminated in RCAs.
Features:
10 ins and 10 outs
XLR Microphone inputs with pre amps
S/PDIF I/O, MIDI I/O, wordclock I/O
24-bit 96 kHz recording
Convenient and powerful routing possibilities
Unsurpassed fidelity
Superior driver technology
The broadest compatibility of any card
Zero latency hardware monitoring
Bit-for-bit accurate digital transfers via S/PDIF
Powerful digital mixing and routing
Control over SCMS (Serial Copy Management System)
http://www.m-audio.com/products/en_us/Delta1010LT.html
2. STA ADC/DAC 2000 (Hoontech) - ASKING $330AU
NOTE: I haven't been able to find decent drivers for Mac OS 10.4 or 10.5
Included ss a high quality 24bit/96kHz PCI host card (DSP24), the XG-DB I digital expansion daughter board bracket, the ADC&DAC2000 external converter unit (19 inch standard format), and the cable to join the two.
Features:
10 x 10 24-bit/96kHz 100% Full-Duplex recording path support
2 x balanced (XLR) inputs with built in pre-amps (-24dB to +50dB) & switchable phantom power (48V)
2 x balanced (XLR) outputs
8 x 1/4" unbalanced inputs
8 x 1/4" unbalanced outputs
coaxial and optical & AES/EBU I/O connections as standard
stereo headphone output with volume control (1/4" connector)
2 x 16 channel (32 channels) MIDI interface ports provided (2 outputs, 1 input)
peak LED for channel 1&2
up to four PCI cards can be sample accurate sync linked (40 channel I/O)
internal or external sync supported (external can be set via the S/PDIF input)
44pin H-BUS interface connector available
22kHz~99kHz frequency rates supported
direct monitoring for input signals (zero latency, by hardware)
Logic Soundtrack 24 (24bit/96kHz powerful recording software from Emagic)
drivers available for Windows 9x/Me/NT/2000/XP, ASIO 2.0 (typical latency can be lowered to 2ms or lower), multiclient-GSIF (GigaSampler/-Studio)
Controller Chip & Converters:
ADC&DAC2000 external rack uses AKM AK4524 ADC/DAC (24bit/96kHz, 100dB S/N ratio a-weighted) converters on all stereo inputs and outputs
DSP24 host card uses the IC Ensemble Envy24 I/O controller chip (ICE1712)
DSP24 internal I/O for standard windows system sounds (mini-jacks on card) uses SigmaTel STAC97xx 18bit AC-97 Codec (ADC & DAC) 95dB output S/N ratio (a-weighted)
http://www.st-audio.de/products/dsp2000.html
3. M-Audio Firewire 410 - MAYBE for sale - ASKING $280AU
Features:
2 x 8 24-bit/96kHz analog I/O; 192kHz stereo out
2 mic/line ins w/ preamps and phantom power
8 line outs to mixer or direct surround output
S/PDIF digital I/O w/ PCM, AC-3, and DTS support
1 x 1 MIDI I/O
http://www.m-audio.com/products/en_us/FireWire410.html
I will include free freight to all eastern Australian states, approximately $10~$15 to SA and $15~$20 to WA. Anyone overseas who is interested, let me know and I'll check the postage cost for you.
1. M-Audio Delta 1010 LT - virtually brand new in box. ASKING $270AU
This includes the card, flyleads plus I will include a 3 meter multicore for the line level IO terminated in RCAs.
Features:
10 ins and 10 outs
XLR Microphone inputs with pre amps
S/PDIF I/O, MIDI I/O, wordclock I/O
24-bit 96 kHz recording
Convenient and powerful routing possibilities
Unsurpassed fidelity
Superior driver technology
The broadest compatibility of any card
Zero latency hardware monitoring
Bit-for-bit accurate digital transfers via S/PDIF
Powerful digital mixing and routing
Control over SCMS (Serial Copy Management System)
http://www.m-audio.com/products/en_us/Delta1010LT.html
2. STA ADC/DAC 2000 (Hoontech) - ASKING $330AU
NOTE: I haven't been able to find decent drivers for Mac OS 10.4 or 10.5
Included ss a high quality 24bit/96kHz PCI host card (DSP24), the XG-DB I digital expansion daughter board bracket, the ADC&DAC2000 external converter unit (19 inch standard format), and the cable to join the two.
Features:
10 x 10 24-bit/96kHz 100% Full-Duplex recording path support
2 x balanced (XLR) inputs with built in pre-amps (-24dB to +50dB) & switchable phantom power (48V)
2 x balanced (XLR) outputs
8 x 1/4" unbalanced inputs
8 x 1/4" unbalanced outputs
coaxial and optical & AES/EBU I/O connections as standard
stereo headphone output with volume control (1/4" connector)
2 x 16 channel (32 channels) MIDI interface ports provided (2 outputs, 1 input)
peak LED for channel 1&2
up to four PCI cards can be sample accurate sync linked (40 channel I/O)
internal or external sync supported (external can be set via the S/PDIF input)
44pin H-BUS interface connector available
22kHz~99kHz frequency rates supported
direct monitoring for input signals (zero latency, by hardware)
Logic Soundtrack 24 (24bit/96kHz powerful recording software from Emagic)
drivers available for Windows 9x/Me/NT/2000/XP, ASIO 2.0 (typical latency can be lowered to 2ms or lower), multiclient-GSIF (GigaSampler/-Studio)
Controller Chip & Converters:
ADC&DAC2000 external rack uses AKM AK4524 ADC/DAC (24bit/96kHz, 100dB S/N ratio a-weighted) converters on all stereo inputs and outputs
DSP24 host card uses the IC Ensemble Envy24 I/O controller chip (ICE1712)
DSP24 internal I/O for standard windows system sounds (mini-jacks on card) uses SigmaTel STAC97xx 18bit AC-97 Codec (ADC & DAC) 95dB output S/N ratio (a-weighted)
http://www.st-audio.de/products/dsp2000.html
3. M-Audio Firewire 410 - MAYBE for sale - ASKING $280AU
Features:
2 x 8 24-bit/96kHz analog I/O; 192kHz stereo out
2 mic/line ins w/ preamps and phantom power
8 line outs to mixer or direct surround output
S/PDIF digital I/O w/ PCM, AC-3, and DTS support
1 x 1 MIDI I/O
http://www.m-audio.com/products/en_us/FireWire410.html
I will include free freight to all eastern Australian states, approximately $10~$15 to SA and $15~$20 to WA. Anyone overseas who is interested, let me know and I'll check the postage cost for you.