Sansui AU 200000

[speakerman1]

I have a customer who wants some very big mods done to his Sansui. Does anyone have any suggestions as who can do them? Thanks
Larry

[clint e.]

Here's imho, some thoughts about you could do to not only in that unit but also in almost any audio amp:

Replace all supply electrolytic with Panasonic FC or Grey Elna.
Replace all Electrolytic in the audio path with Elna Cerafine.
Replace all NP Electrolytic with Black Gate type N.
Install IEC320 AC connector and shielded AC cable.
Install some ferrite rings in audio path wires.
Replace feet with good EAR one (as use with Bel Canto gears).

Also you could replace the supply rectifier diodes with fast discrete recovery diodes.

Have fun.



This post has been edited by clint e. on August 15, 2008 09:42 am

[clint e.]

Here's some hot links to some audio parts & acessories:

http://www.thlaudio.com/indexE.htm

http://www.hificollective.co.uk/components/capacitors.html

http://www.audio-cube.nl/elna.htm

http://www.octave-electronics.com/Parts/capacitors.shtml

Hope it helps.

This post has been edited by clint e. on August 15, 2008 09:50 am